1/28 2WD indoor Racer

JR128-R01 – PRO CAR MODEL WITH BRUSHLESS MOTOR

About this 1/28 PRO-KIT BRUSHLESS Car Model

JR128-R01 series models are ultra small high performance 2WD indoor racing cars with a lot of very advanced opportunities for fine tuning and car setup, which you might find very surprising in a car of this very small size.

Various alternative commercially available steering servos, micro receivers and micro car ESCs for brushed or brushless motors from other brands can be built in and used in this car.

KIT-PRO-BRL-transparent-Lager-Diff-Akku-Lader

Included in each Kit

9 ball bearings MR63ZZ
ball differential with 64dp fine pitch
2S / 7.4V Lipo battery
digital metal gear steering servo

Not assembled JR128-R01 PRO RC CAR KIT:

• High Resistance Professional Chassis
• Adjustable Front Suspension
• Adjustable Rear Suspension
• 9x Ball Bearings
• Ball Differential (V-Groove PN)
• Fast Metal Gear Digital Steering-Servo;
• Brushless Motor; Hobbywing 2S / 7.4V / Brushless ESC programmable; Aluminium Steering Knuckles; Transponder Holder

Lithium Polymer (Lipo) Battery:

• 2S / 7.4V / 25C / 420mAh Lipo Battery

Miscellaneous Parts and Tools (8 Bags):

• Cross-Screwdriver; Hex-Wrench-1.5mm; +3 different plastic Tools
• Front Body-Holder-Adjustment-Set for many other Car Bodies
• Miscellaneous adjustment Parts and Washers
• Steering- Servo-, Rear Body-Holder and Adjustment Parts
• Other Pinions and replacement Gear for Change of Car-Speed
• Steel- and Replacement Parts and Springs for Change of Setup
• O-Rings for Replacement
• Screws for Replacement
• All plastic Parts from plastic RTR-Set

The chassis offers the following features:

• Caster-angle at front suspension adjustable in three positions: 1.1°, 2.7°, 4.4°.
• Camber-angle at front suspension left and right adjustable: from 0° to -2.5°.
• Toe-in / Toe-out adjustable at: 0°, +1°, +2°, -1°, -2°.
• Droop limits at front suspension free adjustable.
• Adjustable springs at front suspension.
• Ground clearance front and rear adjustable on 4 levels in steps of 0.7mm.
• Longitudinal damper with spring and droop-spring fully adjustable.
• Cross-dampers with springs for fine tweak adjustment.
• Rear scale body holder adjustable in height with included washers. Second rear scale body holder for wider scale bodies included.
• Front scale body holder set adjustable to most scale bodies from other brands for wide front and 98mm or 102mm wheelbase.

Technic Base RTR-Pro with brushless motor

Click on the buttons for more information!